Mizuno iron specs chart: 7-iron lofts from 28 degrees (JPX 925 Hot Metal) to 34 degrees (Mizuno Pro S-1)

Golf Club Fitting

September 30, 2026

The quick answer: Mizuno's current irons come in two families. JPX 925 (Hot Metal, Hot Metal Pro, Hot Metal HL, Forged, Forged Black and the Fli-Hi long irons) and Mizuno Pro (S-1, S-3, S-4, M-13, M-15 and the Fli-Hi). Their 7-irons range from 28° (JPX925 Hot Metal, JPX925 Hot Metal Pro) to 34° (Mizuno Pro S-1, Mizuno Pro S-3, Mizuno Pro S-4). The Mizuno Pro 243 was replaced by the M-13, the Pro 245 by the M-15, and the Pro 241 by the S-1. Full loft, lie, offset and length tables for every model are below.

Mizuno 7-Iron Loft Comparison

The quickest way to compare Mizuno irons is the 7-iron and pitching wedge, from strongest loft to weakest:

Iron7-iron loftPW loft7-iron lie7-iron length
JPX925 Hot Metal28°42°62°37.25"
JPX925 Hot Metal Pro28°42°62°37.25"
Mizuno Pro M-1529°43°62°37.25"
JPX925 Forged30°43°62°37.25"
JPX925 Forged Black30°43°62°37.25"
JPX925 Hot Metal HL31°45°62°37.25"
Mizuno Pro M-1332°44°62°37.25"
Mizuno Pro S-134°46°62°37.25"
Mizuno Pro S-334°46°62°37.25"
Mizuno Pro S-434°46°62°37.25"

Every current Mizuno 7-iron has the same 62° lie and the same 37.25" length; the loft is what changes between models. The JPX 925 Hot Metal's 7-iron is 2° stronger than the JPX 925 Forged's (28° vs 30°).

⛳ Check your own lofts against these
A set that's a few degrees stronger than your wedges can leave a big gap at the bottom of the bag. Our free bag grade checks your loft gapping from driver to wedge, and the Loft & Lie Checker compares clubs you've measured against standard. Grade my bag free →

Mizuno JPX 925 Iron Specs

JPX925 Hot Metal

In Mizuno's words: “The new Hot Metal iron family introduces a multi-material design, strategically incorporating tungsten into our Nickel Chromoly designs, enhancing distance with impressive height and spin.”

ClubLoftLieOffsetLength
419°60.5°0.224"38.75"
522°61°0.213"38.25"
625°61.5°0.201"37.75"
728°62°0.189"37.25"
832.5°62.5°0.173"36.75"
937°63°0.154"36.25"
PW42°63.5°0.13"35.75"
GW48°64°0.106"35.5"
SW54°64°0.083"35.25"

JPX925 Hot Metal Pro

ClubLoftLieOffsetLength
419°60.5°0.15"38.75"
522°61°0.142"38.25"
625°61.5°0.134"37.75"
728°62°0.126"37.25"
832.5°62.5°0.118"36.75"
937°63°0.11"36.25"
PW42°63.5°0.102"35.75"
GW48°64°0.094"35.5"

JPX925 Hot Metal HL

ClubLoftLieOffsetLength
422°60.5°0.26"38.75"
525°61°0.248"38.25"
628°61.5°0.236"37.75"
731°62°0.224"37.25"
835°62.5°0.197"36.75"
940°63°0.169"36.25"
PW45°63.5°0.142"35.75"
GW50°64°0.122"35.5"
SW55°64°0.102"35.25"

JPX925 Forged

ClubLoftLieOffsetLength
421°60.5°0.15"38.75"
524°61°0.142"38.25"
627°61.5°0.134"37.75"
730°62°0.126"37.25"
834°62.5°0.118"36.75"
938°63°0.11"36.25"
PW43°63.5°0.102"35.75"
GW48°64°0.091"35.5"

JPX925 Forged Black

ClubLoftLieOffsetLength
421°60.5°0.15"38.75"
524°61°0.142"38.25"
627°61.5°0.134"37.75"
730°62°0.126"37.25"
834°62.5°0.118"36.75"
938°63°0.11"36.25"
PW43°63.5°0.102"35.75"
GW48°64°0.091"35.5"

JPX925 Fli-Hi

In Mizuno's words: “The JPX925 Fli-Hi is the perfect addition to the top end of any set for the player looking to maximize height and control in stronger lofts.”

ClubLoftLieLength
419°59.75°40"
522°60.5°39.25"
625°61.25°38.5"
728°62°37.75"

Mizuno Pro Iron Specs

Mizuno Pro S-1

In Mizuno's words: “The Mizuno Pro S-1 irons are pure muscle backs, designed for players who demand ultimate precision and workability.”

ClubLoftLieOffsetLength
424°60.5°0.098"38.75"
527°61°0.094"38.25"
630°61.5°0.091"37.75"
734°62°0.087"37.25"
838°62.5°0.083"36.75"
942°63°0.079"36.25"
PW46°63.5°0.075"35.75"

Mizuno Pro S-3

In Mizuno's words: “The Mizuno Pro S-3 irons represent the pinnacle of refined craftsmanship and elite performance, embodying the heritage of Mizuno’s forging expertise while catering to the demands of today’s golfers.”

ClubLoftLieOffsetLength
321°60°0.13"39.25"
424°60.5°0.126"38.75"
527°61°0.122"38.25"
630°61.5°0.118"37.75"
734°62°0.114"37.25"
838°62.5°0.11"36.75"
942°63°0.106"36.25"
PW46°63.5°0.102"35.75"

Mizuno Pro S-4

In Mizuno's words: “The Mizuno Pro S-4 has been engineered for accomplished golfers seeking the unmistakable feel of a forged iron with greater forgiveness and confidence throughout the set.”

ClubLoftLieOffsetLength
321°60°0.173"39.25"
424°60.5°0.165"38.75"
527°61°0.157"38.25"
630°61.5°0.15"37.75"
734°62°0.138"37.25"
838°62.5°0.126"36.75"
942°63°0.114"36.25"
PW46°63.5°0.102"35.75"

Mizuno Pro M-13

ClubLoftLieLengthBounce
422°60.5°38.75"2°
525°61°38.25"3°
628°61.5°37.75"4°
732°62°37.25"5°
836°62.5°36.75"6°
940°63°36.25"7°
PW44°63.5°35.75"8°
GW48°64°35.5"9°

Mizuno Pro M-15

ClubLoftLieLengthBounce
420°60.5°38.75"2°
523°61°38.25"3°
626°61.5°37.75"4°
729°62°37.25"5°
833°62.5°36.75"6°
938°63°36.25"7°
PW43°63.5°35.75"8°
GW48°64°35.5"9°

Mizuno Pro Fli-Hi

In Mizuno's words: “The Mizuno Pro Fli-Hi has become a fixture with the majority of Mizuno’s tour players.”

ClubLoftLieOffsetLengthBounce
216.5°59.5°0.177"40"0°
319°60°0.173"39.5"0°
421.5°60.5°0.169"39"1°

Mizuno publishes bounce rather than offset for the M-13 and M-15, so their tables show bounce.

Mizuno Pro 245 Specs

The Pro 245 has been replaced by the M-15, but it's still one of the most-searched Mizuno irons. These are Mizuno's own published specs, from its Pro 245 page as archived in August 2025:

ClubLoftLieOffsetLengthBounce
216.5°59°0.15"39.75"1°
319°59.5°0.142"39.25"1°
421.5°60°0.138"38.75"2°
524°60.5°0.134"38.25"3°
627°61°0.13"37.75"4°
730°61.5°0.122"37.25"5°
834°62°0.114"36.75"6°
938°62.5°0.106"36.25"7°
PW43°63°0.098"35.75"8°
GW48°63°0.094"35.5"9°

What Replaced the Mizuno Pro 241, 243 and 245?

Previous modelReplaced byIn Mizuno's words
Mizuno Pro 243Mizuno Pro M-13“The M-13, successor to the Mizuno Pro 243, combines traditional head shaping with modern construction to create a set that offers more speed through the long irons and greater precision in the scoring clubs.”
Mizuno Pro 245Mizuno Pro M-15“The M-15, successor to the Mizuno Pro 245, offers a fully integrated progression of performance from long iron to wedge.”
Mizuno Pro 241Mizuno Pro S-1Mizuno’s Pro 241 page now takes you to the S-1, which it describes as “pure muscle backs.”

Going from the Pro 245 to the M-15, the 7-iron moves from 30° to 29°. Mizuno no longer publishes the full Pro 241 and Pro 243 spec tables, so for those sets check the numbers stamped on your own clubs, or have a club fitter measure them.

Frequently asked questions

What is the loft of a Mizuno JPX 925 Hot Metal 7-iron?

28°, with a 62° lie and a 37.25" length, per Mizuno's spec table.

What replaced the Mizuno Pro 243?

The Mizuno Pro M-13. Mizuno calls it "the M-13, successor to the Mizuno Pro 243."

What replaced the Mizuno Pro 245?

The Mizuno Pro M-15. Mizuno calls it "the M-15, successor to the Mizuno Pro 245."

What is the loft of a Mizuno Pro 245 7-iron?

30°, from Mizuno's published Pro 245 specs. Its successor, the M-15, has a 29° 7-iron.

Are JPX 925 Forged lofts weaker than Hot Metal?

Yes. The JPX 925 Forged 7-iron is 30° and the Hot Metal 7-iron is 28°.

What is the lie angle of a Mizuno 7-iron?

62° on every current Mizuno iron set, from the JPX 925 Hot Metal to the Mizuno Pro S-1.

Sources: the spec tables on each Mizuno iron page, and Mizuno's Pro 245 page (archived August 2025), checked September 30, 2026.

Related reading

Related Articles

Mizuno iron specs chart: 7-iron lofts from 28 degrees (JPX 925 Hot Metal) to 34 degrees (Mizuno Pro S-1)

Golf Club Fitting

September 30, 2026

Mizuno Iron Specs Chart: JPX 925 & Mizuno Pro Lofts and Lies

Mizuno iron specs chart: loft, lie, offset and length for every JPX 925 and Mizuno Pro iron, plus the Pro 245 and what replaced the 241, 243 and 245.

Cobra driver adjustment chart: a 10.5 degree head plays 8.5 to 12.5 degrees with FutureFit33

Golf Club Fitting

September 29, 2026

Cobra Driver Adjustment Chart: All 33 FutureFit33 Settings

Cobra driver adjustment chart: all 33 FutureFit33 settings (A1, C7, E1…) with loft and lie, right- and left-handed, plus OPTM and DS-ADAPT specs.

TaylorMade loft sleeve chart: a 10.5 degree head plays 8.5 to 12.5 degrees

Golf Club Fitting

September 29, 2026

TaylorMade Loft Sleeve Chart: Every Driver Setting, Qi4D & Qi35

TaylorMade loft sleeve chart: all 12 driver settings (STD, HIGHER, LOWER, UPRT) with loft, face and lie, plus Qi4D and Qi35 specs.